 |
Your #1 Source for DVRs & Security Camera Products | ||
Security Camera Power Supplies
Camera Power Supply
PWR-4C2A
Supports up to 4 cameras
12 Volts, DC with a maximum of 2 amps output
Internal power protection stops current in the event of a short
Power is restored after shorted circuit is repaired
2.1mm barrel connectors support almost all 12V security cameras
Generous length--over 6' from camera connectors to wall plug
PWR-4C2A
Supports up to 4 cameras 12 Volts, DC with a maximum of 2 amps output Internal power protection stops current in the event of a short Power is restored after shorted circuit is repaired 2.1mm barrel connectors support almost all 12V security cameras Generous length--over 6' from camera connectors to wall plug
PWR-9C5A
Supports up to 9 cameras 12 Volts, DC with a maximum of 5 amps output Screw-down terminals for easy connection to power leads Sturdy Metal Box with nice powder coat finish PTC fuses individually protect each camera. After a short
situation is repaired, they automatically reset without the need of replacement. LEDs for each camera verify current is active On / Off rocker switch inside box Mount to wall or place on flat surface Includes power cord + 1 male lead for every camera purchased Knock-outs on sides and back for easy wire entry Dimensions: 8.0"w x 9.5"h x 3.5"d
18 Channel, 10 Amp Output
PWR-18C10A
Supports up to 18 cameras 12 Volts, DC with a maximum of 10 amps output Screw-down terminals for easy connection to power leads Sturdy Metal Box with nice powder coat finish PTC fuses individually protect each camera. After a short
situation is repaired, they automatically reset without the need of replacement. LEDs for each camera verify current is active 2 On/Off rocker switches inside box--one for each bank of 8 Mount to wall or place on flat surface Includes power cord + 1 male lead for every camera purchased Knock-outs on sides and back for easy wire entry Dimensions: 8.0"w x 9.5"h x 3.5"d
24VAC Single Power Supply, 50 watt output (2amps)
PWR-24VAC-50
24VAC Volts, 50W / 2amp Output Screw down terminals to connect bare wire UL Listed LED to indicate power is on 24VAC has no polarity (no +/- terminals) Works well with 24VAC PTZ Cameras Internal power protection stops current in the event of a short Power is restored after shorted circuit is repaired Works well w/ 24VAC to 12VDC converter for long cable runs.